SVPA-34
Revision as of 22:27, 23 May 2020 by GearyEppley (talk | contribs)
Contents
SVPA-34: The "T" at W Snoqualmie River Rd SE
Installation Notes
Problems and Considerations
- Sensor Height – mount at 12.48’ above bottom of ditch.
- Currently the only site using a 14’ sensor – do not mount higher than 14’.
- Access issues – location is immediately adjacent to road but will be raised up higher.
- This is the lowest part of the road, so it should be installed in the same location.
- Theft worries?
- Sensing Cone Issues – the cone of detection will be wider with the new height.
- Be sure sensor mounted out from the post by at least 20.5” (radius of cone at ground level).
- Be sure road edge is not within cone.
- May need to install post back from ditch.
