SVPA-34

SVPA-34: The "T" at W Snoqualmie River Rd SE

Installation Notes

Problems and Considerations

• Sensor Height – mount at 12.48’ above bottom of ditch.
  • Currently the only site using a 14’ sensor – do not mount higher than 14’.

• Access issues – location is immediately adjacent to road but will be raised up higher.
  • This is the lowest part of the road, so it should be installed in the same location.
  • Theft worries?

• Sensing Cone Issues – the cone of detection will be wider with the new height.
• Be sure sensor mounted out from the post by at least 20.5” (radius of cone at ground level).
• Be sure road edge is not within cone.
• May need to install post back from ditch.

Links

• Floodzilla
• Google Map