SVPA-15

From floodzilla-wiki
Revision as of 18:19, 24 May 2020 by GearyEppley (talk | contribs) (→‎Attributes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

SVPA-15: 124th St East at Local Roots Farm

Status ACTIVE
Upstream SVPA-17 Goose & Gander
Downstream SVPA-15B 124th W

Attributes

  • Est. 2019
  • Road - 124th St East - falling flood crosses here last
  • Slough
  • Senses concrete pad when water is low
  • Mounted on 4x4 post with cement pad

Installation Notes

Problems and Considerations (May 2020)

  • Sensor Height – mount at same height or greater (15.04’).
    • Cantilever arm must be level and static.
    • Mount out over center of ditch if possible.
  • RSSI issues – must be kept at same height for best RSSI.
  • Access issues – field adjacent to ditch is often saturated, access to site by foot.
    • Cannot reach transmitter to change batteries without taking the post down, shouldn't have to take post down to access transmitter.
    • Position of post adjacent to the ditch is awkward and unsafe when using a ladder to try and access sensor.
    • Could move the location closer to 124th St for better vehicle access.
  • Sensing Cone Issues – the cone of detection is very wide at the ground level.
    • Be sure sensor mounted out from the post by at least 24” (radius of cone at ground level).
    • Problems with flood debris getting caught on post and being detected within the cone even after flood waters recede.

Links