Difference between revisions of "SVPA-34"
Jump to navigation
Jump to search
GearyEppley (talk | contribs) (Created page with "= SVPA-34: The "T" at W Snoqualmie River Rd SE = == Installation Notes == === Problems and Considerations === *Sensor Height – mount at 12.48’ above bottom of ditch. **...") |
GearyEppley (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | = SVPA-34: The "T" at W Snoqualmie River Rd SE = | + | == SVPA-34: The "T" at W Snoqualmie River Rd SE == |
== Installation Notes == | == Installation Notes == | ||
Revision as of 22:27, 23 May 2020
Contents
SVPA-34: The "T" at W Snoqualmie River Rd SE
Installation Notes
Problems and Considerations
- Sensor Height – mount at 12.48’ above bottom of ditch.
- Currently the only site using a 14’ sensor – do not mount higher than 14’.
- Access issues – location is immediately adjacent to road but will be raised up higher.
- This is the lowest part of the road, so it should be installed in the same location.
- Theft worries?
- Sensing Cone Issues – the cone of detection will be wider with the new height.
- Be sure sensor mounted out from the post by at least 20.5” (radius of cone at ground level).
- Be sure road edge is not within cone.
- May need to install post back from ditch.
