Difference between revisions of "SVPA-15"

Revision as of 23:22, 23 May 2020

Sensor Height – mount at same height or greater (15.04’).
- Cantilever arm must be level and static.
- Mount out over center of ditch if possible.

RSSI issues – must be kept at same height for best RSSI.
Access issues – field adjacent to ditch is often saturated, access to site by foot.
- Cannot reach transmitter to change batteries without taking the post down, shouldn't have to take post down to access transmitter.
- Position of post adjacent to the ditch is awkward and unsafe when using a ladder to try and access sensor.
- Could move the location closer to 124^th St for better vehicle access.

Sensing Cone Issues – the cone of detection is very wide at the ground level.
- Be sure sensor mounted out from the post by at least 24” (radius of cone at ground level).
- Problems with flood debris getting caught on post and being detected within the cone even after flood waters recede.

@@ Line 1: / Line 1: @@
 == SVPA-15: 124th St East at Local Roots Farm ==
-* Upstream: [[SVPA-17]] Goose & Gander
+{| class="wikitable" style="float:right; margin-left: 10px;"
-* Downstream: [[SVPA-12]] Wild Canary
+! scope="row"| Status
+| ACTIVE
+|-
+! scope="row"| Downstream
+| [[SVPA-17|SVPA-17 Goose & Gander]]
+|-
+! scope="row"| Upstream
+| [[SVPA-12|SVPA-12 Wild Canary]]
+|}
 === Attributes ===
 * Road - 124th St (East - falling side of a flood)