Difference between revisions of "SVPA-33"
Jump to navigation
Jump to search
GearyEppley (talk | contribs) |
GearyEppley (talk | contribs) |
||
| Line 1: | Line 1: | ||
==SVPA-33: Snoqualmie River at Keller Dairy== | ==SVPA-33: Snoqualmie River at Keller Dairy== | ||
| − | + | {| class="wikitable" style="float:right; margin-left: 10px;" | |
| − | + | ! scope="row"| Status | |
| − | + | | ACTIVE | |
| + | |- | ||
| + | ! scope="row"| Upstream | ||
| + | | [[SVPA-34|SVPA-37 Sno Falls Golf]] | ||
| + | |- | ||
| + | ! scope="row"| Downstream | ||
| + | | [[SVPA-34|SVPA-34 Keller Dairy]] | ||
| + | |} | ||
===Attributes=== | ===Attributes=== | ||
Revision as of 23:26, 23 May 2020
Contents
SVPA-33: Snoqualmie River at Keller Dairy
| Status | ACTIVE |
|---|---|
| Upstream | SVPA-37 Sno Falls Golf |
| Downstream | SVPA-34 Keller Dairy |
Attributes
- Est. 2019
- Main channel
- Mounted on tree
Installation Notes
Problems and Considerations (May 2020)
- Sensor Height – mount at current height (20’).
- Cantilever arm must be level and static.
- RSSI issues – receiver is nearby, but leaf cover may be blocking line of sight.
- Could try to get antenna out over river further or up higher.
- Could mount transmitter and sensor separately.
- Safety Issues – location has a steep (~10’) drop off into the river.
- Design must take into account river safety and ease of access of transmitter.
- Access issues – location is immediately adjacent to road, but in a precarious spot at edge of bank.
- If transmitter is mounted separate from sensor, both will need to still be accessible for battery changes, maintenance.
- Sensing Cone Issues – the cone of detection is very wide at water surface.
- Any interfering branches may need to be removed.
- Sensor should be mounted out over the river as far as it is now or farther.
