Difference between revisions of "SVPA-33"
Jump to navigation
Jump to search
GearyEppley (talk | contribs) |
GearyEppley (talk | contribs) |
||
| Line 1: | Line 1: | ||
==SVPA-33: Snoqualmie River at Keller Dairy== | ==SVPA-33: Snoqualmie River at Keller Dairy== | ||
| + | |||
| + | * Upstream: [[SVPA-34]] | ||
| + | * Downstream: [[SVPA-26]] | ||
| + | |||
===Attributes=== | ===Attributes=== | ||
*Est. 2019 | *Est. 2019 | ||
*Main channel | *Main channel | ||
| + | *Mounted on tree | ||
==Installation Notes== | ==Installation Notes== | ||
Revision as of 23:04, 23 May 2020
Contents
SVPA-33: Snoqualmie River at Keller Dairy
Attributes
- Est. 2019
- Main channel
- Mounted on tree
Installation Notes
Problems and Considerations (May 2020)
- Sensor Height – mount at current height (20’).
- Cantilever arm must be level and static.
- RSSI issues – receiver is nearby, but leaf cover may be blocking line of sight.
- Could try to get antenna out over river further or up higher.
- Could mount transmitter and sensor separately.
- Safety Issues – location has a steep (~10’) drop off into the river.
- Design must take into account river safety and ease of access of transmitter.
- Access issues – location is immediately adjacent to road, but in a precarious spot at edge of bank.
- If transmitter is mounted separate from sensor, both will need to still be accessible for battery changes, maintenance.
- Sensing Cone Issues – the cone of detection is very wide at water surface.
- Any interfering branches may need to be removed.
- Sensor should be mounted out over the river as far as it is now or farther.
