Difference between revisions of "SVPA-34"

Revision as of 23:03, 23 May 2020

Sensor Height – mount at 12.48’ above bottom of ditch.
- Currently the only site using a 14’ sensor – do not mount higher than 14’.

Access issues – location is immediately adjacent to road but will be raised up higher.
- This is the lowest part of the road, so it should be installed in the same location.
- Theft worries?

Sensing Cone Issues – the cone of detection will be wider with the new height.
Be sure sensor mounted out from the post by at least 20.5” (radius of cone at ground level).
Be sure road edge is not within cone.
May need to install post back from ditch.

@@ Line 1: / Line 1: @@
-== SVPA-34: The "T" at W Snoqualmie River Rd SE ==
+==SVPA-34: The "T" at W Snoqualmie River Rd SE==
-== Installation Notes ==
+* Upstream: [[SVPA-37]]
-=== Problems and Considerations ===
+* Downstream: [[SVPA-33]]
+==== Attributes ====
+* Est. 2019
+* Road - W Snoqualmie River Rd NE
+* Ditch
+* Dry when not flooding
+* Mounted on 4x4 post
+==Installation Notes==
+===Problems and Considerations (May 2020)===
 *Sensor Height – mount at 12.48’ above bottom of ditch.
@@ Line 16: / Line 27: @@
 *May need to install post back from ditch.
-== Links ==
+==Links==
-* [https://floodzilla.svpa.us/gage/SVPA-34 Floodzilla]
-* [https://google.com/maps?q=47.5878215313253,-121.926108200526 Google Map]
+*[https://floodzilla.svpa.us/gage/SVPA-34 Floodzilla]
+*[https://google.com/maps?q=47.5878215313253,-121.926108200526 Google Map]