Difference between revisions of "SVPA-33"
Jump to navigation
Jump to search
GearyEppley (talk | contribs) |
GearyEppley (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
|- | |- | ||
! scope="row"| Upstream | ! scope="row"| Upstream | ||
| − | | [[SVPA-34|SVPA-34 | + | | [[SVPA-34|SVPA-34 The "T"]] |
|- | |- | ||
! scope="row"| Downstream | ! scope="row"| Downstream | ||
| − | | [[SVPA-26|SVPA-26 Blue | + | | [[SVPA-26|SVPA-26 Blue Heron Golf]] |
|} | |} | ||
| Line 22: | Line 22: | ||
*Sensor Height – mount at current height (20’). | *Sensor Height – mount at current height (20’). | ||
**Cantilever arm must be level and static. | **Cantilever arm must be level and static. | ||
| − | |||
| − | |||
| − | |||
| − | |||
*Safety Issues – location has a steep (~10’) drop off into the river. | *Safety Issues – location has a steep (~10’) drop off into the river. | ||
Latest revision as of 15:25, 3 June 2020
Contents
SVPA-33: Snoqualmie River at Keller Dairy
| Status | ACTIVE |
|---|---|
| Upstream | SVPA-34 The "T" |
| Downstream | SVPA-26 Blue Heron Golf |
Attributes
- Est. 2019
- Main channel
- Mounted on tree
Installation Notes
Problems and Considerations (May 2020)
- Sensor Height – mount at current height (20’).
- Cantilever arm must be level and static.
- Safety Issues – location has a steep (~10’) drop off into the river.
- Design must take into account river safety and ease of access of transmitter.
- Access issues – location is immediately adjacent to road, but in a precarious spot at edge of bank.
- If transmitter is mounted separate from sensor, both will need to still be accessible for battery changes, maintenance.
- Sensing Cone Issues – the cone of detection is very wide at water surface.
- Any interfering branches may need to be removed.
- Sensor should be mounted out over the river as far as it is now or farther.
