Difference between revisions of "SVPA-17"
Jump to navigation
Jump to search
GearyEppley (talk | contribs) |
GearyEppley (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
! scope="row"| Status | ! scope="row"| Status | ||
| ACTIVE | | ACTIVE | ||
| + | |- | ||
| + | ! scope="row"| Upstream | ||
| + | | [[SVPA-22|SVPA-22 Stossel Bridge]] | ||
|- | |- | ||
! scope="row"| Downstream | ! scope="row"| Downstream | ||
| − | |||
| − | |||
| − | |||
| [[SVPA-15|SVPA-15 124th East]] | | [[SVPA-15|SVPA-15 124th East]] | ||
|} | |} | ||
Latest revision as of 17:41, 24 May 2020
Contents
SVPA-17: NE 100th St at Goose & Gander Farm
| Status | ACTIVE |
|---|---|
| Upstream | SVPA-22 Stossel Bridge |
| Downstream | SVPA-15 124th East |
Attributes
- Road - NE 100th St
- Est. 2019
- Farm field
- Dry when not flooding
- Mounted on 4x4 post
Installation Notes
Problems and Considerations: (May 2020)
- Sensor Height – mount at least 12.69’ above concrete pad.
- Cantilever arm must be level and static.
- This site could use a 14’ sensor if it is repaired.
- Access issues – location is immediately adjacent to farm access road, but may not be useable to access.
- Will need ladder or some way to access transmitter for battery changes, maintenance.
- Sensing Cone Issues – the cone of detection will be wider since the sensor will be higher than is currently.
- Sensor should be mounted out (> 21”) away from post (radius of cone).
